aircycle 1.1 HRV Filter Set (AM 90-02-232) | Contains 2 x Individual Filters (AR 90-02-030)
Product Code: AM 90-02-232
Wire frame, polyester media (G2/3)
Easy-pull tabs
Dimensions: H 270mm x W 180mm x D 3mm
Showing all 7 results
-
-
aircycle 1.2 HRV Filter Set (AM 90-02-229) | Contains 2 x Individual Filters (AR 90-02-158)
Product Code: AM 90-02-229
Wire frame, polyester media (G2/3)
Easy-pull tabs
Dimensions: H 294mm x W 180mm x D 3mm
-
aircycle 1.3 HRV Filter Set (AM 90-02-229) | Contains 2 x Individual Filters (AR 90-02-158)
Product Code: AM 90-02-229
Wire frame, polyester media (G2/3)
Easy-pull tabs
Dimensions: H 294mm x W 180mm x D 3mm
-
aircycle 3.1 HRV Filter Set (AM 90-02-238) | Contains 2 x Individual Filters
Product Code: AR 90-02-238
Wire frame, polyester media (G3)
Rubber, easy-pull tabs
Dimensions: H 540mm x W 180mm x D 3mm
-
Aircycle 4.1 HRV Filter Set (AM 90-02-238) | Contains 2 x Individual Filters
Product Code: AR 90-02-238
Wire frame, polyester media (G3)
Rubber, easy-pull tabs
Dimensions: H 540mm x W 180mm x D 3mm
-
Brookvent Aircycle 3.1/4.1 Wall Bracket Kit
A Brookvent Aircycle 3.1/4.1 Replacement Wall Bracket Kit. Product Code: AS 90-09-806.
The unit should be attached the to the wall using the wall bracket provided, please ensure the mounting surface can safely bear the load of the unit using suitable screw fixings.
Step by Step Instructions for Wall Mount:
Remove the existing bracket which will be secured to the back of the unit and replace with new one.
The second bracket should be secured to the mounting surface (wall) Please ensure the brackets are level.
The unit can then be set onto the mounting surface with the lip of each bracket
Ensure the system is level when fully mounted.
Ensure the unit is fully attached and secure.
If you have any questions regarding this procedure, please get in contact with the office on 02890616505 or hello@brookvent.co.uk
https://brookvent.co.uk/product/aircycle-3-1-house-ventilation-systems/
-
Product Code: AF70-70-PIR SW
Rear and side entry knockouts, integral cable clamp and large mains terminals for 2 x 1.5mm conductors. Easy to wire from surface cables and enables loop-in/ loop-out for supply to other sensors.
Elongated fixing slots; simple to position and fix to surface.
Passive infra-red; ensures light is switched on when sensor detects movement of heat; therefore lighting is switched off when the area is vacated. There is less likelihood of false triggers compared to microwave which switches on any movement.
Integral sensor dust-shield to prevent false triggering.