The Brookvent airstream Xe is a discreet intermittent decentralised mechanical ventilation unit which is perfectly suited to utilisation in both new build and refurbishment projects. Airflow is maximised whilst noise is minimised, thanks to the unique fan impeller design, which reduces turbulence. Mount either on wall, panel, window or ceiling, and extract stale air either directly to outside or through a short run of ducting, for the ultimate in versatility.
— IPX4 protection degree.
— Aerodynamic deflectors on the housing to reduce air turbolences and designed to maximise airflow.
— Rigid optimised spigot preventing deformation and designed to maximize airflow.
— Low power consumption: Efficient EC motor consuming even less than 8 watts (100mm models).
— 100mm and 150mm diameter versions available
— Versatile installation: wall/panel, ceiling and window.
— Totally recyclable plastic components, environmentally friendly.
— Double insulated: no earth connection is required.
— Tested to the latest standards:
• units are tested in the TÜV Rhineland laboratory, meaning accurate, up to date information on electrical safety, performance and noise level that can be relied upon
• designed and manufactured in accordance with EN60335-2-80 (Low Voltage Directive) and the EMC Directive (Electromagnetic Compatibility)
OPTIONS
Airstream Xe
The fan is operated via a separate ON/OFF switch or the light switch. Airstream Xe T
The fan is equipped with a timer circuit adjustable from 1 to 25 minutes delay. After switching off, the fan continues to run for the pre-set period. Airstream Xe HT
The fan is provided with an electronic circuit with a humidity sensor on board (adjustable from 50% to 95% RH) and a timer, adjustable from 1 to 25 minutes
delay. When the level of relative humidity is higher than the pre-set threshold, the fan is automatically activated. When the relative humidity goes below the
set level, the fan continues to run for the preset period.
The Brookvent airstream DMEV is a decentralised Mechanical Extract Ventilation (d-MEV) system. Continuous extraction is quieter and more efficient than intermittent fans.Low energy, this continuous extraction process draws out the moist air from wet rooms and bathrooms (and even kitchen and utilities). A single flow unit, this DMEV is perfect for application in toilets, bathrooms, and small to medium spaces or premises.
The Brookvent airstream 1.1 EH is a continuous mechanical extract ventilation (MEV) unit, with EC motor, integral humidistat, and timer. With 5 versatile duct connections to each wet room and wall, ceiling, or floor mount options, this unit is flexible and versatile. Quiet and efficient, the Airstream control indicator also ensures full compliance with TGD Part F 2019. Low specific fan power down to 0.6 W/I/s and a local boost facility ensure this maintenance free unit does exactly what it says on the tin.
Efficient and quiet, the Brookvent airstream 1.1. E is a continuous mechanical extract ventilation (MEV) unit. With duct connections to each wetroom, it is versatile, and allows for wall, ceiling or floor mount options for the best finish and efficacy. Maintenance free and with a local boost facility, this Brookvent 1.1 MEV unit is quieter and more efficient at removing the stale air from bathrooms and wetrooms, and supplying fresh, clean air.
