A durable, robust and cost effective Glazed In vent, suitable for a wide range of applications.
The basic glazed in vent. Simple and effective. Aluminium body with uPVC hood.
Showing 129–144 of 202 results
-
-
An effective control strategy minimizes ownership and operating costs and ensures that heated air curtains maintain a consistent, comfortable temperature at all times. Controlling the fan speed is particularly important. If the velocity is too low, the air stream will be too weak to stop cool air entering the building. If it is too high, turbulence at floor level may result in heat loss. The Thermoscreens touch controller is available as standard with all air curtains.
-
EcoPower Remote Control and Monitoring
An effective control strategy minimizes ownership and operating costs and ensures that heated air curtains maintain a consistent, comfortable temperature at all times. Controlling the fan speed is particularly important. If the velocity is too low, the air stream will be too weak to stop cool air entering the building. If it is too high, turbulence at floor level may result in heat loss.
-
-
-
-
-
Fan convectors are one of the safest, easiest and most cost-effective ways of heating the schools and nurseries buildings. With minimal maintenance requirements, fan convectors rapidly distribute heat across the classrooms whilst occupying much less wall space than a radiator of equivalent output. The Forceflow CB fan convector has been designed to provide similar heating duties to traditional fan convectors but with condensing boiler water temperatures of 60°C flow and 40°C return, or lower.
-
Fan convectors are one of the simplest and most cost-effective ways of heating an area quickly. The latest in a long line of market-leading designs, the H2 Select is available in 21 styles as standard and other styles and configurations on request. Easy to install and simple to maintain, Forceflow Fan Convectors can be mounted almost anywhere on the wall or ceiling, either as an exposed/cased or concealed/recessed unit.
Easy to install and simple to maintain, Forceflow H2 Select can be mounted almost anywhere on the wall or ceiling, either as an exposed/cased or concealed/recessed unit.
The H2 Select comes with a finger and pencil proof grille and is available in 21 styles as standard and incorporates a non-handed casing and increased internal space for speedier installation.
-
Whereas most fan convectors have a surface temperature in excess of 50°C, the surface temperature of the Forceflow Low Surface Temperature (LST) is no greater than 43°C. This is a significant safety benefit, especially in environments where there are young children or vulnerable adults, such as nurseries, infant and special needs schools, sheltered accommodation and care homes.
-
-
-
-
-
-
INNOVAIR Fresh Air Fan Convector
Innovair fresh air fan convectors provide controlled volumes of fresh air, control of space temperature and free/night cooling. All Innovair units incorporate a unique ‘cyclic’ fresh air damper system, which allows the amount of outside air entering the space to be accurately metered and varied in line with the occupants’ fresh air requirements. With or without BMS control, one Innovair unit will heat and ventilate a typical room, occupied by up to 31 people.
The patented ‘cyclic’ fresh air damper system provides precise quantities of outside air for ventilation (BB101),free cooling and night cooling. It is also available with high efficiency fans operating at a specific fan power of <0.2W/l/s.
Innovair was specifically developed to meet the requirements of all the regulations covering heating and ventilation equipment in schools and to overcome all ventilation challenges.
