Innovair fresh air fan convectors provide controlled volumes of fresh air, control of space temperature and free/night cooling. All Innovair units incorporate a unique ‘cyclic’ fresh air damper system, which allows the amount of outside air entering the space to be accurately metered and varied in line with the occupants’ fresh air requirements. With or without BMS control, one Innovair unit will heat and ventilate a typical room, occupied by up to 31 people.
The patented ‘cyclic’ fresh air damper system provides precise quantities of outside air for ventilation (BB101),free cooling and night cooling. It is also available with high efficiency fans operating at a specific fan power of <0.2W/l/s.
Innovair was specifically developed to meet the requirements of all the regulations covering heating and ventilation equipment in schools and to overcome all ventilation challenges.
Features & benefits
• Natural ventilation capability
• Control of space temperature using LPHW
• Controlled volumes of fresh air, heated as necessary using LPHW
• Free and night cooling
Technology
Based upon a conventional fan convector with a filter, fan(s) and heating coil within a sheet metal casing with discharge and return air spigots/grilles, it’s patented ‘cyclic’ fresh air damper system provides precise quantities of outside air for the purposes of ventilation (BB101 calls for 8 l/sper person), free cooling and night cooling.
Innovair Damper
• Precise introduction of fresh air
• Draught free ventilation
• Enhanced comfort
• Energy savings
Incorporating a Trend IQeco35 microprocessor controller with Bacnet BMS capability, enabling the unit to:
DecoQT – Quiet, efficient and easy to maintain.
The DecoQT fan coil unit was designed meticulously to provide a solution that can promise quietness by operating between 28dB(A) at low speed, and 43dB(A) at full speed. Biddle’s ongoing commitment to innovation allows the DecoQT to provide optimal airflow, quietly ensuring maximum comfort for room occupants.
Fan convectors are one of the simplest and most cost-effective ways of heating an area quickly. The latest in a long line of market-leading designs, the H2 Select is available in 21 styles as standard and other styles and configurations on request. Easy to install and simple to maintain, Forceflow Fan Convectors can be mounted almost anywhere on the wall or ceiling, either as an exposed/cased or concealed/recessed unit.
Easy to install and simple to maintain, Forceflow H2 Select can be mounted almost anywhere on the wall or ceiling, either as an exposed/cased or concealed/recessed unit.
The H2 Select comes with a finger and pencil proof grille and is available in 21 styles as standard and incorporates a non-handed casing and increased internal space for speedier installation.
Whereas most fan convectors have a surface temperature in excess of 50°C, the surface temperature of the Forceflow Low Surface Temperature (LST) is no greater than 43°C. This is a significant safety benefit, especially in environments where there are young children or vulnerable adults, such as nurseries, infant and special needs schools, sheltered accommodation and care homes.
Brookvent
Typically replies within minutes
Online | Privacy policy
