Showing 1–16 of 22 results
-
Comfort Air Curtains (4)
-
Fan Coils (5)
-
Heat Recovery (1)
-
Heating & Ventilation (6)
-
Industrial Air Curtains (3)
-
Industrial Heaters (3)
-
Commercial buildings of all types have become increasingly well insulated to maximise energy efficiency. This makes them more cost effective to heat and run. However, it can have a negative effect on the indoor air quality. Good ventilation is essential to prevent this, but if it is not carefully controlled, it can lead to heat loss and increased energy consumption. Biddle’s proven ventilation system with heat recovery pre-heats clean, fresh air as it enters the building using the energy/warmth from the air that is vented out. As a result, it is not only highly energy efficient, but also very cost effective.
Fully compliant with the latest UK and European legislation, the Biddle system can reduce CO2 emissions associated with heating and ventilation by more than 90%
-
The Biddle IndAC2 industrial air curtain is the perfect solution for separating climates in industrial buildings. Doors are often open for long periods of time to facilitate transport in and out of the building.
The IndAC2 air curtain can be used for climate separation between indoor and outdoor environments and for indoor climate separation between two spaces with different temperatures.
High Climate Separation Efficiency – Open doors cause energy loss and disturb the inside climate; the difference between the inside and outside temperature leads to an exchange of air, resulting in cold air entering and warm, heated air, flowing out. When the IndAC2 air curtain is mounted above or next to an open door it provides a very efficient climate separation at the lowest energy consumption.
-
The MAT air curtain is used for climate separation between the cold store and the loading area in order to keep the temperature at a constant level in the cold store. Furthermore it allows unobstructed access to and from the cold store, radically reducing misting and icing and provides an energy saving solution.
Energy Saving Hybrid Solution
Energy saving solutions are becoming of great importance in the industrial and cold sector. In order to meet this trend, Biddle has developed the MAT Hybrid, which makes use of waste heat of cooling machines in order to save energy. In practice, up to 80% energy savings have been measured by applying the MAT Hybrid model compared to an equivalent electrical unit.
-
The Comfort Circle Cassette Heater allows you to quickly heat your indoor space, providing an even distribution of air, through the circular air discharge ensuring maximum comfort throughout the room.
The compact Comfort Circle cassette heater fits into suspended ceiling grids allowing floor and wall surfaces to remain available for shelves, racks and other furniture. The cassette unit heater is a recessed ceiling model and can be quickly easily installed in a suspended ceiling system leaving only the stylish circular air discharge grille visible.
The stylish circular grille and low noise emissions make the unit ideally suited for use in schools, universities, colleges, shops, offices, showrooms, reception areas, museums, banks and libraries.
-
The Biddle Comfort Circle cassette unit is designed for heating, cooling and /or ventilating shops and public buildings. With its stylish appearance and low noise level, this Comfort Circle is suitable for use in shops, showrooms, offices, reception areas and computer rooms. With its low build-in height of about 30 cm, the Comfort Circle is ideal for mounting above a suspended ceiling but it can also be hung freely in the room.
The devices that can both heat and cool have a unique, patented ring, which automatically selects the right discharge angle needed for the best downward penetration to comfortably heat or cool the room.
-
A pleasant work and living environment is determined to a large degree by the quality of the indoor climate. Fan coil units allow air conditioning for individual rooms and provide optimum control of the indoor climate by heating, cooling and/or ventilating the room. The Biddle DECO fan coil is a quiet unit, which can be positioned in the room to ensure the discharged air stream is distributed evenly across the room to achieve maximum comfort, without causing a nuisance to the people in it. DECO fan coil unit is adapted for use in the renovation of old buildings, as well as the construction of new ones.
Usually, HVAC devices should blend in with their environment. That is why the external design matters.The DECO fan coil unit is available in 5 sizes, with and without casing, and can heat, cool or ventilate the room. The model with casing is available as a wall model or as a ceiling model and can be free standing or suspended. Another solution would be to incorporate the device into structures. The recessed model is easy to integrate into the wall or ceiling void.
-
DecoQT – Quiet, efficient and easy to maintain.
The DecoQT fan coil unit was designed meticulously to provide a solution that can promise quietness by operating between 28dB(A) at low speed, and 43dB(A) at full speed. Biddle’s ongoing commitment to innovation allows the DecoQT to provide optimal airflow, quietly ensuring maximum comfort for room occupants.
-
Fan convectors are one of the safest, easiest and most cost-effective ways of heating the schools and nurseries buildings. With minimal maintenance requirements, fan convectors rapidly distribute heat across the classrooms whilst occupying much less wall space than a radiator of equivalent output. The Forceflow CB fan convector has been designed to provide similar heating duties to traditional fan convectors but with condensing boiler water temperatures of 60°C flow and 40°C return, or lower.
-
Fan convectors are one of the simplest and most cost-effective ways of heating an area quickly. The latest in a long line of market-leading designs, the H2 Select is available in 21 styles as standard and other styles and configurations on request. Easy to install and simple to maintain, Forceflow Fan Convectors can be mounted almost anywhere on the wall or ceiling, either as an exposed/cased or concealed/recessed unit.
Easy to install and simple to maintain, Forceflow H2 Select can be mounted almost anywhere on the wall or ceiling, either as an exposed/cased or concealed/recessed unit.
The H2 Select comes with a finger and pencil proof grille and is available in 21 styles as standard and incorporates a non-handed casing and increased internal space for speedier installation.
-
Whereas most fan convectors have a surface temperature in excess of 50°C, the surface temperature of the Forceflow Low Surface Temperature (LST) is no greater than 43°C. This is a significant safety benefit, especially in environments where there are young children or vulnerable adults, such as nurseries, infant and special needs schools, sheltered accommodation and care homes.
-
Innovair fresh air fan convectors provide controlled volumes of fresh air, control of space temperature and free/night cooling. All Innovair units incorporate a unique ‘cyclic’ fresh air damper system, which allows the amount of outside air entering the space to be accurately metered and varied in line with the occupants’ fresh air requirements. With or without BMS control, one Innovair unit will heat and ventilate a typical room, occupied by up to 31 people.
The patented ‘cyclic’ fresh air damper system provides precise quantities of outside air for ventilation (BB101),free cooling and night cooling. It is also available with high efficiency fans operating at a specific fan power of <0.2W/l/s.
Innovair was specifically developed to meet the requirements of all the regulations covering heating and ventilation equipment in schools and to overcome all ventilation challenges.
-
The Invisidor CITY range of air curtains were developed to bring performance benefits and energy and cost savings at a lower installed cost than ever before, being ideally suited to high street stores and other small buildings. Biddle’s CITY incorporates improved structural design and enhanced aesthetic appeal without compromising its award-winning performance.
Fresh Thinking in Climate Separation
One of the main functions of an air curtain is to condition outdoor air as it enters the building. For this to be achieved, the airflow must cover the full width of the entrance, so that it cannot be bypassed by incoming air. However, ensuring the airflow reaches the floor level is more difficult, with turbulence at the air outlet being a critical factor.
-
The Invisidor Doorflow Comfort Air Curtain was designed to enhance comfort conditions within commercial environments, from fashionable department stores to universities and colleges. The latest development in a long line of market leading air curtains, the DoorFlow has been developed to be not just of minimalist design but also to minimise maintenance, bringing a continuous and consistent long lasting level of performance and maximize energy savings.
FILTER FREE AIR CURTAIN
The Invisidor DoorFlow uses Biddle’s proven, patented rectifier to supply conditioned air at low speed with minimum turbulence, ensuring the air stream reaches the floor and doesn’t escape to the outside. Comfort within the entrance area is therefore enhanced without any energy wastage.
-
Architects, M&E designers and building owners are constantly looking for ways of enhancing the appearance of the entrance environment without compromising on performance. The Invisidor STYLE range combines Biddle’s patented technology along with contemporary design. Available in a variety of finishes the Invisidor STYLE range has an eye-catching cylindrical profile and a distinctive perforated grille. With the design being modular, any door width can be covered, and buildings requiring vertical rather than horizontal air curtains can still use this range to create a ‘top end’ designer look to the entrance environment.
Invisidor STYLE uses Biddle’s proven, patented rectifier to supply conditioned air at low speed with minimum turbulence, ensuring the air stream reaches the floor and doesn’t escape to the outside. Comfort within the entrance area is therefore enhanced without any energy wastage.
-
The IsolAir2 chilled room air curtain is the perfect solution for indoor climate separation which does not require heating. Fitting an IsolAir2 air curtain above the doorway ensures an ideal separation between two temperature zones, whilst energy consumption is kept to a minimum. The air curtain is specifically designed for indoor climate separation where several climate zones are more or less constant. The IsolAir is applied in chilled rooms of production companies, distribution centres and in small cold stores in supermarkets.
Climate Separation without heating
When a building consists of several climate zones, an open inside door leads to air displacement and as a consequence energy loss. An IsolAir above an open door provides very efficient climate separation between the two areas limiting energy consumption
-
Recognising the demand for high performance fan coils on certain projects Biddle sourced the best quality components and developed a fan coil which has been proven in many prestigious installations.
Individual direct-drive fans, rather than a fan deck, ensure the highest performance and quiet operation, with a flame retardant polymeric-based drain tray enabling steam cleaning in environments such as hospitals. Filters, of an EU2 grade, are of a cardboard frame type which can be removed without dismantling the ceiling grid. Available as an ‘on-show’ cased variant for high or low level use.
Online | Privacy policy