Whereas most fan convectors have a surface temperature in excess of 50°C, the surface temperature of the Forceflow Low Surface Temperature (LST) is no greater than 43°C. This is a significant safety benefit, especially in environments where there are young children or vulnerable adults, such as nurseries, infant and special needs schools, sheltered accommodation and care homes.
Features & benefits
A special Thermostatic Radiator Valve (TRV) is fitted to the heating coil pipework and a temperature sensor positioned immediately behind the discharge grille. The valve modulates between the open and closed positions carefully maintaining the discharge air temperature, so that surface temperature satisfies LST regulations whilst optimising heat output.
Each Forceflow LST fan convector runs continuously at a single fan speed which is chosen and set by the installer or end user. The unit is supplied as standard with:
Forceflow LST offers all the benefits of a conventional Forceflow Fan convector, despite having a lower surface temperature, and heat output per metre length is over twice that of an equivalent LST radiator.
Fan Convectors are universally acknowledged to be one of the simplest and most cost-effective ways to heat rooms of all types and sizes.
Its unique sectional configuration ensures compatibility with previous building work. The three sections are delivered separately for ease of handling. Quick and easy to fix together, the H2 Select Fan Convector unit can be secured to virtually any wall and utilises existing apertures, minimising building work.
DecoQT – Quiet, efficient and easy to maintain.
The DecoQT fan coil unit was designed meticulously to provide a solution that can promise quietness by operating between 28dB(A) at low speed, and 43dB(A) at full speed. Biddle’s ongoing commitment to innovation allows the DecoQT to provide optimal airflow, quietly ensuring maximum comfort for room occupants.
The Comfort Circle Cassette Heater allows you to quickly heat your indoor space, providing an even distribution of air, through the circular air discharge ensuring maximum comfort throughout the room.
The compact Comfort Circle cassette heater fits into suspended ceiling grids allowing floor and wall surfaces to remain available for shelves, racks and other furniture. The cassette unit heater is a recessed ceiling model and can be quickly easily installed in a suspended ceiling system leaving only the stylish circular air discharge grille visible.
The stylish circular grille and low noise emissions make the unit ideally suited for use in schools, universities, colleges, shops, offices, showrooms, reception areas, museums, banks and libraries.
INNOVAIR Fresh Air Fan Convector
Innovair fresh air fan convectors provide controlled volumes of fresh air, control of space temperature and free/night cooling. All Innovair units incorporate a unique ‘cyclic’ fresh air damper system, which allows the amount of outside air entering the space to be accurately metered and varied in line with the occupants’ fresh air requirements. With or without BMS control, one Innovair unit will heat and ventilate a typical room, occupied by up to 31 people.
The patented ‘cyclic’ fresh air damper system provides precise quantities of outside air for ventilation (BB101),free cooling and night cooling. It is also available with high efficiency fans operating at a specific fan power of <0.2W/l/s.
Innovair was specifically developed to meet the requirements of all the regulations covering heating and ventilation equipment in schools and to overcome all ventilation challenges.
